70W BOX MOD UD BALROG FULL KIT - GREAT AS GIFT FOR SMOKER
Availability: In Stock
70W UD BALROG TC Kit W/O Battery Excellent For Starters Great as a Gift! Video Review Product introduction 70W UD BALROG TC Kit W/O Battery, is a super starter......
70W UD BALROG TC Kit W/O Battery
Excellent For Starters
Great as a Gift!
70W UD BALROG TC Kit W/O Battery, is a super starter kit from UD. It comes with an airflow controllable tank in 3ml. You can enjoy vaping at both VW and TC mode.
Material: Stainless Steel, Zinc Alloy & brass
Resistance & Working Wattage:
1.8ohm: suggested 15 - 22W
0.5ohm: suggested 20 - 38W
Ni200 0.15ohm: suggested 200 - 450℉
70W BALROG TC MOD
Size: 78 x 38 x 23mm
Thread: 510 Thread
Max Ouput Voltage: 8.5V
Max Output Current: 26A
Wattage: 5W - 70W
Temperature Range: 200 - 600℉
Resistance: 0.15ohm - 3.0ohm
Suggested Battery: 3.7V 20A discharge 18650 battery (NOT included)
This kit comes with
- 1 x 70W BALROG TC MOD
- 1 x BALROG Tank(0.5ohm coil pre-installed)
- 1 x kanthal 1.8ohm coil
- 1 x Ni200 0.15ohm coil
- 1 x USB cable
- 1 x MOD strap
- 1 x replacement Pyrex glass tube
- 1 x accessory kit
- 1 x User Manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
1. Super Mini Starter Kit
2. Single 18650 battery
3. 200 - 600℉ TC Range
4. Screen reversal function
5. Output Short Circuit Protection
6. Overheating Protection
7. Voltage protection
8. VW and TC Modes
9. Airflow Control
Refilling: Unscrew the stainless top cap; refilling from the top hole; screw well after refilling finished.
Power On/Off: press fire button 5 times in succession to turn on/off the device.
Switch Modes: Under stand by mode, consecutively press the power button 3 times to enter menu mode; between VW/TC modes; "+" or "-" means switch button; power button means enter and confirm.
Adjust Wattage/Temp: press "+" or "-" to increase or decrease the wattage/temp.
Adjust Temperature Sensitivity: Follow "figure 1" to enter into "SENSITIVITY" setting, 1 means the most sensitive.
Screen reversal: Follow "figure 1" for instruction, enter into "screen" to adjust. (right/left/stealth) Press power button 3 times to cancel stealth.
Initial Resistance Checking: press both the "+" and "-" to check atomizer resistance.
Lock/Unlock: press power button and "-" simultaneously to lock/unlock the device.
Battery Installation: open the battery cap and place one battery into the device.
Change Battery: Please change battery when you see "power too weak" alarm.
- 510 Threaded
- It doesn't come with liquids, you shall buy separately.
- It doesn't come with 18650 batteries, which you shall buy separately
Guarantee period: 3 months for the MOD.