Authentic 50w Box Mod SMY50
Availability: In Stock
SMY50 BOX MOD About the product Battery SMY50 TMC Has temperature control function. Vaping is better without burn taste. Perfect design with 510 pin, and you can use almost......
SMY50 BOX MOD
About the product
Battery SMY50 TMC Has temperature control function. Vaping is better without burn taste. Perfect design with 510 pin, and you can use almost all atomizers. The box mod has a original but authentic damping slide back Micro USB and cover, so it is possible easily recharge or change the battery anytime.
Please be confident that the coil when it is under TC mode is of pure Nickel 200. Another way, the device will recognize automatically and turn into the common mode instead of TC Mode.
Material: Zinc Alloy
Size of box: 99mm x 49mm x 28mm
Voltage of Input: 3.5V – 4.2V DC
Voltage of output: 1V – 14V DC
Wattage of output: 5W – 50W
Range of Resistance: 0.1ohm – 3.0ohm (VW: 0.1ohm -- 3.0ohm; VT: 0.1ohm -- 1ohm)
Temperature Range: 200 - 600F
Connection: 510 Threaded
- SMY50 TC BOX MOD
- USB charger
- Cleaning Material
- Pass card
- Gift Box
1)510 pin for loaded spring
2)One 18650 Battery fit
3) 6 Safety Protection:
*High temperature *Anti-reverse *Short Circuit *Temperature Control *Low Voltage *Timeout
4)Contains USB Charging Port
5)Damping Design And Slide Cover
6) Common Mode (VW: 5W - 50W) and VT Mode (TC: 200 - 600F)
1. The device will reduce power automatically and show low voltage if battery power is too low to support current output power.
2. If the time of a puff is longer than the setting mode, output will be interrupted automatically
3. Be sure the battery's lasting discharge current must be more than 25A to create enough power, same as to make the battery's heating in the processing.
How to Use
1. Remove the back cover and put 1 x 18650 in right positive and negative position and then close the cover;
2. Put the atomizer on the 510 connection in the clockwise direction;
3. Push the fire button 5 times after inserting the battery to power on/ off the mod;
4. To open the main menu mode push the fire button 3 times quickly if you want to set up the operation parameters;
5. If do not use it for a long time, the mod will automatically enter into lock, to unlock press the ▶ ◀ keys at the same time;
6. Push ▶ and "menu" button at the same time can quickly switch between Normal Mode and TC Mode;
7. After opening the main menu, press power button to confirm your setting and exit to Home screen directly.
8. Exit the main menu, display the standby screen and pressing ▶ and ◀ button under normal mode to adjust wattage, and adjust Temp under TC Mode;
9. Screw off the atomizer and reconnect the atomizer, under the TC mode. After push the fire button then the screen will show if it's a new atomizer. It will show the current atomizer's resistance if you choose YES; it will show the resistance of atomizer last time used if you choose NO.
- Batteries need to buy separately - 18650
- 510 connection.