Authentic Box Mod Starter Kit 75W Vaporesso TARGET VTC Kit (Ceramic Coil included)
Availability: In Stock
75W Vaporesso TARGET VTC Kit with Ceramic cCELL Coil Tank 75W Vaporesso TARGET VTC Kit, a new product of Vaporesso. Target Box Mod comes with 75W VT/VW modes. And......
75W Vaporesso TARGET VTC Kit with Ceramic cCELL Coil Tank
75W Vaporesso TARGET VTC Kit, a new product of Vaporesso. Target Box Mod comes with 75W VT/VW modes. And the no spitting tank installed a cCELL coil, which has a longer lifecycle. cCELL coil, true ceramic coil without wicks. The heating coil and ceramic are made together to form a coil unit.
Tank Size: 22 (D) x 62mm (L)
Tank volume: 3.5ml
Coil: 0.2ohm cCELL Ni200 coil; 0.9ohm Kanthal coil
Mod Dimension: 92x 48x 27 mm
Temp Range: 150 - 315 °C / 300F - 600F
OutPut Wattage: 5W - 75W
Suitable Atomizer: 0.15ohm or above
Battery cell type: 1x 18650 battery (not included)
Casting: Zinc Alloy and Stainless steel
Thread: 510 Thread
It comes with
- 1 x Target tank with a cCELL coil (0.9ohm cCELL Kanthal coil pre-installed)
- 1 x Target 75W Box Mod
- 1 x Extra replacement Ni200 cCELL Kanthal coil (0.2ohm)
- 1 x USB cable
- 1 x USer Manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
1) Ceramic cCELL Coil
2) No Spitting
3) No Dry Hit
4) Self Cleaning
5) Delivering original aroma of ejuice. Clean, pure and consistent flavor.
6) 2 adjustable modes: Variable Temp and Variable Wattage
Power on and off: press the fire button for 5 times in quick succession to turn on or turn off the Mod;
Rotate the screen display: fast click fire button 3 times;
Lock parameters: press the "+" steadily while press the fire button simultaneously, " System Locked" appears on the screen. Repeat the motion will unlock it.
Charging: Plug in the micro USB cable to charge the battery, OLED will display the current battery level (0%, 20%, 50%, 80% and 100%).
Shift between TC and VW modes: press the "+" "-" together to switch the the 2 modes.
Lock/Unlock resistance: Under TC modes, press the "-" and fire button simultaneously for 2s will lock/unlock the resistance.
Automatic atomizer recognition: The mode will ask the user if a new atomizer is attached. " OLD LOAD-, New LOAD+" will appear on the display. Press "+", the mode will read new resistance; press "-" the mod will read at locked resistance.
Filling e-Juice: Remove the tank from a battery and turn the tank upside down; Unscrew the air control base and fill e-juice into the tank. Make sure the e-juice level is below the middle stem and no e-juice split into it. Screw the air control base back. And you can use it now.
- It doesn't come with e-liquids. You shall buy separately.
- No 18650 battery included.